Contrôle des décollements-Separated flow control and aerodynamic performance improvements-3rd GDR

Collectif - GDR 2502 - Editor : Azeddine Kourta 3 rd GDR « Separation flow Control »The conception of aeronautic system or road vehicle faces challenging issues such as: prediction of receptivity modes generated by the actuation, development of optimal and robust control, closed loop, conception of micro-scale actuators and sensors, optimal use of energy conversion, establishment of measure fast estimation process, … To address these issues, a better understanding of underlying physics and related interactions are needed. In the context of aerodynamic performance which is cornerstone in both aeronautic and automotive domains, the flow separation presents an important issue challenge. This mechanism leads to a decrease of performances. One way to improve these situations is to use a control. This control must be active and low cost. The efficiency of the control is closely dependent on the used systems and technics. To reach this goal, scientific and technical progresses are needed. On the scientific point of view, mechanisms leading to a separation have to be analyzed and characterized. Also, the actuation has to be efficient and low cost. The technical goal concerns both the sensor and actuator systems. More exactly which parameter has to be selected to first apply the actuation and then to evaluate the results by using suitable sensors. For the actuation, it relies on the choice of high quality actuator to develop and to be able to satisfy fulfill requirements.GDR (Groupement De Recherche / Joint Research Project) is a CNRS federative project between French university research laboratories and ONERA departments working in the framework of flow control and sensors or actuators technologies. Aeronautical and car industries interested in using flow control are also involved as partnership (Dassault-Aviation, PSA, Renault, SNECMA, Plastic-Omnium, Eurocopter). The GDR is a multi-disciplinary network. The objective of this national network is to develop a collaborative project from the fundamental concept to a full scale demonstrator. The control of high lift induced separation on airfoil may improve the flight envelope of current aircraft or even simplify the complex and heavy high-lift devices on commercial airframes. This is also the case for car vehicle where the control can improve drag, reduce noise and hence reduce pollutant emissions and fuel consumption. The work involved here coverss experimental, numerical and theoretical studies done in the context of French national program (GDR2502 “Flow Separation Control”) devoted to design better actuators and to set up optimal and robust control.